Skip to content

Owner Guides · BMW

BMW LL-01 vs LL-04 vs LL-17 FE+: Which Oil Does Your BMW Need?

BMW Longlife oils decoded: what LL-01, LL-04, LL-12 FE, LL-14 FE+, LL-17 FE+ and LL-19 FE mean, which engines take which, and US vs EU rules.

· updated 8 minBy Haris Cars

BMW LL-01 vs LL-04 vs LL-17 FE+: Which Oil Does Your BMW Need?

BMW Longlife approvals (LL-01, LL-04, LL-17 FE+ and the rest) are BMW's own engine oil specifications, and the right one depends on your engine, model year, emissions hardware and the market the car was sold in. As a rule, US-market gasoline BMWs run LL-01 or LL-01 FE, and newer B-series engines may also take a 0W-20 LL-14 FE+ or LL-17 FE+ oil if the manual lists it. Diesels with a particulate filter need a low-ash oil such as LL-04, LL-12 FE or LL-19 FE. A higher number is not automatically a replacement for a lower one.

Below we cover what each approval means, how they map to the N20/N26, N52, N54/N55, B38/B48/B58, S55/S58 and N47/B47 engines, and what "backward compatible" actually covers. Where we could not confirm an engine-to-spec match from BMW or oil-maker documentation, we say so. In those cases, check the owner's manual for your VIN.

What a BMW Longlife approval actually is

A Longlife approval means BMW has tested and listed that specific oil formulation. Matching the viscosity alone is not enough. A 0W-30 with no BMW approval is not an LL-01 oil just because the grade matches.

This matters because of how BMW services its cars. German lubricant maker Addinol notes that BMW's on-board computer calculates the oil change interval based on Longlife oil properties, so the oil in the sump should meet a Longlife requirement. Look for the exact designation, such as "BMW Longlife-01 FE", on the bottle.

Each Longlife approval in plain terms

Each approval targets a specific group of engines and markets. Here is what each one covers, based on oil-maker technical data sheets and BMW owner's manuals.

  • LL-01: For selected gasoline engines and diesels without a particulate filter, from 2001 on. Approved oils come in 0W-30, 0W-40, 5W-30 and 5W-40. Outside Europe, this is the baseline approval for gasoline BMWs.
  • LL-01 FE: A fuel-economy version of LL-01. Liqui Moly explains that the "FE" gain comes from a lower high-temperature, high-shear (HTHS) viscosity. Motul's data sheet says LL-01 FE also covers the older LL-98 approval. It is a gasoline-engine spec.
  • LL-04: A reduced-ash ("mid-SAPS") oil for engines with a particulate filter. Motul's LL-04 data sheet gives the limits as sulfated ash of 0.8% or less, phosphorus of 0.07 to 0.09% and sulfur of 0.3% or less. It is mandatory in diesels with a DPF in every country, but approved for gasoline engines only in the EU, Switzerland, Norway and Liechtenstein.
  • LL-12 FE: A 0W-30 fuel-economy oil built to ACEA C2. Motul states that it suits only BMW diesels certified for it from model year 2014 with no more than one turbocharger, plus BMW gasoline engines from 2002. It is restricted to the EU, Norway, Switzerland and Liechtenstein, and is not valid for engines with two or three turbochargers.
  • LL-14 FE+: A 0W-20 (or 5W-20) oil for selected gasoline engines from model year 2014. BMW's own manual wording is that LL-14 FE+ "is only suitable for particular gasoline engines."
  • LL-17 FE+: A 0W-20/5W-20 oil with a low HTHS viscosity of 2.6 mPa·s, for selected gasoline engines from model year 2014. Motul says it covers and replaces LL-14 FE+, and that it is approved in Europe, the US and Canada.
  • LL-19 FE: A 0W-30 low-SAPS oil aimed at modern engines, fuel economy and long drain intervals. French oil maker Yacco lists it as backward compatible with LL-04 and describes it as a more fuel-efficient replacement for LL-04.
  • LL-22 FE++: Not on our main list, but worth knowing. It is a 0W-12 approval for the latest Gen 3 B48 and B58 mild-hybrid engines, and it is not backward compatible with older engines.

US vs Europe: why LL-04 is a European gasoline oil

LL-04 is approved for gasoline engines only in Europe, so a US-market gasoline BMW should run LL-01 or LL-01 FE. Liqui Moly gives the reason: BMW allows LL-04 only in Europe because the oil needs a specific fuel quality to perform fully. In North America and other regions, Longlife-01 FE is required. Motul's LL-04 sheet says the same thing. Outside the EU, Switzerland, Norway and Liechtenstein, a gasoline BMW needs an approved LL-01 oil.

BMW's manuals reflect this. A 2015-edition BMW 3 Series owner's manual lists "BMW Longlife-01" for gasoline engines and "BMW Longlife-04" for diesels. BMW parts specialist BimmerWorld describes LL-04 as the official recommendation for the US-market 328d, 335d and X5 35d, all of which have particulate filters.

In Europe the rules are looser. A European gasoline BMW without a particulate filter can usually take LL-04 as well as LL-01. That is why a bottle bought in Germany may not suit a car registered in Texas.

Which approval suits which BMW engine

Your engine code narrows the choice, but the owner's manual for your VIN has the final word. This is what we could confirm.

  • N52: A 2007 BMW 328i owner's manual lists BMW High Performance SAE 5W-30, BMW Longlife-01 and BMW Longlife-01 FE. In Europe, LL-04 is also acceptable for gasoline engines.
  • N54/N55: US manuals from this era list LL-01 for gasoline engines, and LL-01 FE appears alongside it in E90-generation manuals. We found no BMW or oil-maker document approving a 0W-20 LL-14 FE+ or LL-17 FE+ oil for these engines, so stick with LL-01 or LL-01 FE unless your manual says otherwise.
  • N20/N26: LL-01 in US manuals. Motul's LL-17 FE+ data sheet names the N20 as an engine the spec especially suits. For the N26, we couldn't find an equivalent statement, so check the manual for your VIN before switching to 0W-20.
  • B38/B48/B58: A 2018 BMW X5 owner's manual lists LL-01 FE and LL-14 FE+ for gasoline engines, with LL-01 and API SL/SM/SN allowed as top-up oils. Motul names "Bx8" engines (B38, B48, B58) as especially suited to LL-17 FE+. A 2023 BMW X7 owner's manual lists LL-01 FE, LL-17 FE+ and LL-22 FE++, with grades from 0W-12 to 0W-30. Which one your engine takes depends on its generation.
  • S58: A BMW M3 Sedan owner's manual printed in 2020 (the G80 generation) lists only BMW Longlife-01 FE, in SAE 0W-30.
  • S55: We could not confirm a single factory listing from a BMW document. Check the manual for your VIN. Keep in mind that the 0W-20 approvals are not suitable for every M engine.
  • N47/B47 diesels: Particulate-filter diesels need a low-ash oil. LL-04 is approved everywhere. In Europe, LL-12 FE is approved for single-turbo four-cylinder diesels from model year 2014 but not for twin-turbo versions, and Yacco's LL-12 FE sheet recommends LL-04 for 25d, 35d, 40d and 50d models. LL-19 FE is listed as backward compatible with LL-04. US-market 328d cars use LL-04.

If you are comparing these engines for a purchase, our N54 vs N55 comparison and B47 vs N47 diesel breakdown cover the mechanical differences behind these oil requirements.

What "backward compatible" really means

A backward-compatible approval is one BMW accepts in engines that previously called for a specific older approval. It is a one-way, engine-specific permission, not a general upgrade. The documented cases are narrow:

  • LL-17 FE+ covers LL-14 FE+: According to Motul, an LL-17 FE+ oil can go anywhere LL-14 FE+ was specified.
  • LL-19 FE covers LL-04: Yacco lists LL-19 FE as backward compatible with LL-04.
  • LL-01 FE covers LL-98: Motul says LL-01 FE also covers the earlier BMW specifications such as LL-98.
  • LL-04 covers LL-98 and LL-01, but only in Europe: Motul states that LL-04 covers the earlier specs, then adds that for gasoline engines this applies only in the EU, Switzerland, Norway and Liechtenstein.

The limits matter just as much. The 2023 X7 manual says LL-17 FE+ is not suitable for the 50i V8 and LL-22 FE++ is not suitable for the 60i. FCP Euro notes that LL-22 FE++ is not backward compatible with older engines. Motul's LL-12 FE sheet rules it out for twin- and triple-turbo diesels. A newer, thinner oil in an engine that was never approved for it is a gamble on bearing and cam wear. The 0W-20 approvals exist for engines BMW designed and tested around them, like the B48 covered in our B48 generations guide.

How to check what your BMW needs

The quickest reliable check is the "Engine oil" section of the owner's manual for your exact car. It lists the approved Longlife specs, the permitted SAE grades and any engine-specific exclusions.

  • Read the approval, not the marketing: The bottle should name the BMW Longlife designation. "Recommended for BMW" is not the same claim.
  • Match the market: If the car was built for the US or Canada and has a gasoline engine, skip LL-04 even if a European forum says it is fine.
  • Top-ups in a pinch: Recent BMW manuals allow up to 1 US quart (1 liter) of an API SL, SM or SN oil if no approved oil is available. Do a full change with the correct oil afterward.
  • Diesels: Never put a full-ash oil in a particulate-filter diesel. LL-01 is explicitly for non-DPF engines.

For hands-on oil service walkthroughs, see our video guides.

Frequently asked questions

Can I use LL-04 oil in a US-market gasoline BMW?

No. BMW approves LL-04 for gasoline engines only in the EU, Switzerland, Norway and Liechtenstein. US and Canadian gasoline cars need an LL-01 or LL-01 FE oil, or a 0W-20 LL-14 FE+/LL-17 FE+ oil if the manual lists it.

What is the difference between LL-01 and LL-01 FE?

LL-01 FE is a fuel-economy version of LL-01 with a lower high-temperature, high-shear viscosity. BMW manuals such as the 2007 328i's list both. Use LL-01 FE only where your manual names it.

Can I put 0W-20 LL-17 FE+ oil in my N54 or N55?

Not unless your owner's manual lists it. Oil-maker documentation names the N20 and the B38/B48/B58 family for LL-17 FE+, not the N54 or N55. Those engines are documented on LL-01-family oils.

Is LL-19 FE a replacement for LL-04 in BMW diesels?

Oil makers list LL-19 FE as backward compatible with LL-04, and it is a low-SAPS 0W-30 suited to particulate filters. Confirm that your diesel's manual or BMW's approval list includes it before switching.

What oil does a B58 take?

Depending on generation and market, BMW manuals and oil-maker data list LL-01 FE, LL-14 FE+, LL-17 FE+ or, on the newest Gen 3 mild-hybrid engines, the 0W-12 LL-22 FE++. Check your manual. Our B58 common problems guide covers what else to watch on this engine.

Sources

Lights on.
Subscribe.

Engine walkthroughs for BMW, VW, Audi and Mercedes-Benz owners, on YouTube at @HarisCars.

Subscribe on YouTube