Engine Guides · BMW
BMW N54 Engine Guide: Specs, Problems and Buying Advice
BMW N54 twin-turbo six explained: verified specs by model, every BMW bulletin on HPFP, injectors, wastegates and water pump, plus a used-car checklist.
14 minVideo walkthroughBy Haris Cars
The BMW N54 is a 3.0-liter twin-turbocharged, direct-injected inline-six that BMW launched in the 335i Coupe in September 2006 and kept building into the 2016 model year for the Z4. Full torque arrives from 1,300 rpm, which is why the engine feels so strong on the road. Its weak points are well documented in BMW's own service bulletins: the high-pressure fuel pump, piezo injectors, turbo wastegates, the electric water pump and carbon on the intake valves. Buy one if you want the performance and can budget for those repairs. Skip it if you need cheap, predictable running costs.
Haris walks through the engine in the video above. This guide is the written reference, with every specification and repair procedure tied to a source you can check.
BMW N54 at a glance
The N54 is an all-aluminum, 2,979 cc inline-six with two turbochargers, high-pressure direct injection and double VANOS, but no Valvetronic.
- Displacement: 2,979 cc
- Bore × stroke: 84.0 × 89.6 mm
- Compression ratio: 10.2:1
- Valvetrain: DOHC, four valves per cylinder, double VANOS (variable intake and exhaust cam timing). No Valvetronic.
- Induction: two exhaust-driven turbochargers in parallel, one for cylinders 1–3 and one for cylinders 4–6, with air-to-air intercooling
- Injection: second-generation direct injection that BMW calls High Precision Injection (HPI), with outward-opening piezo injectors and up to 200 bar of fuel pressure
- Block: pressure-cast aluminum alloy (AL226) with cast-in iron cylinder liners, and a separate bedplate
- Head: aluminum, with a plastic valve cover
- Crankshaft: forged steel
- Engine management: MSD80 engine control unit (DME)
- Cooling: electric water pump rated at 400 W, plus an external engine oil cooler
- Firing order: 1-5-3-6-2-4
- Weight: 187 kg, per BMW's technical data
- US emissions rating: ULEV II
- Years: production from September 2006; in US cars from the 2007 to the 2016 model year
Power and torque by model
BMW rated the N54 at several outputs. Use the figure for the car you're looking at, not a single headline number.
- Standard N54 (335i, 135i, 535i, X6 xDrive35i, Z4 sDrive35i): 225 kW (300 hp) at 5,800 rpm and 400 Nm (295 lb-ft) from 1,300 to 5,000 rpm, according to BMW's 2007 engine training data. In Europe, 225 kW is quoted as 306 PS.
- 740i / 740Li (F01/F02, US 2011–2012): 315 hp and 330 lb-ft, with peak torque from 1,600 rpm, as reported by BMWBlog at the US launch.
- 335is Coupe and Convertible (2011–2013): 320 hp at 5,900 rpm and 332 lb-ft from 1,500 to 5,000 rpm, with a temporary overboost to 370 lb-ft, per BMW's press release. BMW also fitted an extra radiator, a stronger electric fan and an oil cooler.
- Z4 sDrive35is (2011–2016): 335 hp at 5,900 rpm and 332 lb-ft from 1,500 to 4,500 rpm, with overboost to 369 lb-ft, from BMW's launch figures as published by BMWBlog.
- 1 Series M Coupe (2011): 335 hp (250 kW) at 5,900 rpm and 332 lb-ft (450 Nm) from 1,500 to 4,500 rpm, plus a 37 lb-ft (50 Nm) overboost to 369 lb-ft, per BMW's press release.
Which cars have the N54
In the US, the N54 powered the "35i" models of 2007 to 2010, then stayed on in the 335is, Z4 sDrive35i/35is, 740i and 1 Series M after BMW switched the mainstream 35i cars to the N55.
This list comes from the vehicle tables in BMW of North America's own service bulletins and settlement notice:
- 3 Series (E90 sedan, E92 coupe, E93 convertible): 335i and 335xi, 2007–2010 model years; 335i xDrive coupe, 2008–2010
- 335is (E92 coupe, E93 convertible): 2011–2013 model years, using the uprated engine BMW's bulletins call the N54T
- 1 Series (E82 coupe, E88 convertible): 135i, 2008–2010 model years
- 1 Series M Coupe (E82): 2011 model year
- 5 Series (E60 sedan, E61 Sports Wagon): 535i, 535i xDrive and 535i xDrive Sports Wagon, 2008–2010 model years
- X6 (E71): xDrive35i, 2008–2010 model years
- Z4 (E89): sDrive35i, 2009–2016 model years; sDrive35is (N54T), 2011–2016
- 7 Series (F01 740i, F02 740Li): 2011–2012 model years
From the 2011 model year, the 135i, 335i (other than the 335is), 535i (by then the F10) and X6 xDrive35i used the N55. That matters when you're shopping: a 2011 335i coupe and a 2011 335is look nearly the same but have different engines. If in doubt, confirm the engine code on the car before you buy. Our N55 guide covers the successor.
Versions and revisions
The N54 had no single facelift. BMW changed it through higher-output tunes, injector revisions and software updates.
- N54B30O0 (2006): the original engine, per BMW's naming system. "O" means the upper output class and the final "0" means the first version.
- Higher-output tunes (2011 model year onward): the 740i, Z4 sDrive35is, 335is and 1 Series M used more torque and, on the 335is, Z4 35is and 1 Series M, an overboost function. BMW's own bulletins label the 335is and Z4 sDrive35is engine N54T.
- Injector revisions: BMW released an improved piezo injector in January 2013. It's identified by index 11 or higher, has a different calibration and construction, and can't be mixed with index 10-or-lower injectors on the same bank.
- Software: several of the fixes below, for long cranking, wastegate noise and misfires, start with a DME (engine computer) update rather than new parts.
Known N54 problems
The N54's common failures are fuel-system and turbo-system parts, not the bottom end. BMW documented almost all of them in service information bulletins, and NHTSA keeps copies on file.
High-pressure fuel pump (HPFP)
The N54's high-pressure fuel pump can fail. The signs are long cranking, a Service Engine Soon light and, in some cases, a loss of power while driving. BMW's bulletin SI B12 55 06 lists fault 2FBF (often alone, with long cranking) and 29DC, sometimes with 29F1 and 29F2, when the car loses power. BMW handled the pump through emissions recall campaign 10E-A02 and extended the pump's emissions warranty from 4 years or 50,000 miles to 10 years or 120,000 miles on 2007–2010 cars. Nearly every car is now past that limit.
BMW's procedure checks the low-pressure side and DME software before condemning the pump. Codes, recall, warranty and pump history checks are in our N54 HPFP guide.
Piezo fuel injectors
Leaking or badly spraying piezo injectors are the N54's other big fuel-system issue. They show up as rough running on a cold start, misfires and a Service Engine Soon light.
- Symptoms: per SI B13 04 09, very rough running on a cold morning start, misfire codes such as 29CC, 29D2, 29D1, 29D0, 29C0 and 29CF, spark plugs on the misfiring cylinders soaked with fuel, and carbon on the injector tips.
- Cause: BMW names leakage or an incorrect spray pattern from internal wear or an "unfavorable stack of tolerances".
- Fix: replace all three injectors on the affected bank (cylinders 1–3 or 4–6) with the improved part, index 11 or higher, then replace the wet spark plugs and run the injector calibration in the DME. Once a bank is on index 11 or higher, only the failed injector is replaced.
- How to confirm: the index number is printed on the injector body. BMW's 2019 service action for N54T cars has technicians read it in place with a borescope or small mirror.
Three campaigns cover the injectors, so the history of a particular car matters:
- 10E-A02 (injectors): E60, E61, E71, E82, E88, E90, E92 and E93 cars with the N54 built from April 2, 2007 through November 30, 2008 were due to have all six injectors replaced.
- SI B01 02 15 (warranty): BMW extended the injector warranty to 10 years or 120,000 miles on a later group of mostly 2010 model-year N54 cars, plus 2010–2011 Z4 sDrive35i and 2011–2012 740i/740Li. That window has also closed on age for most cars.
- SIB 13 06 19 (service action, December 2019): N54T-engined E92 and E93 cars built between June 30, 2012 and October 1, 2013 get any injector of index 10 or lower replaced.
Wastegate rattle and clank
A light rattle from the turbos is normal on an N54. A repeated metallic clank is not.
- Normal: BMW's SI B11 13 07 says a slight rattle under steady acceleration between 2,000 and 4,000 rpm comes from the rotating wastegate valve face, is "normal operation" and shouldn't be repaired.
- Fault: a clank repeated up to six or seven times as the engine decelerates from about 3,500 rpm, or when the throttle is blipped hard with no gear engaged. BMW's explanation is that the wastegate valve doesn't fully close because of tolerances in the actuator, so it hammers against its seat.
- Fix: on early 335i and 535i cars built up to March 2008, BMW first reprograms the DME and then, if the noise remains, replaces both wastegate actuators. For other cars, the repair BMW lists under the extended wastegate warranty is replacement of the turbocharger, because the covered parts (valve, shaft, actuating arm, seat and the surrounding housing section) belong to the turbo.
A court-approved settlement extended the wastegate emissions warranty to 8 years or 82,000 miles on 2007–2010 335i, 2008–2010 135i, 535i and X6 xDrive35i, and 2009–2010 Z4 sDrive35i models. BMW excluded cars with modified turbo systems, hardware or software. That coverage has expired too.
If turbos are replaced for any reason, BMW's general bulletin SI B11 07 11 says to inspect the oil supply and return lines for blockage, kinks or collapse and to replace them, and their banjo bolts, if restricted. A starved line will kill the new turbo too.
Electric water pump and thermostat
The N54 uses a 400 W electric water pump instead of a belt-driven one. When it fails, the usual result is a check-engine light, an overheating warning, or both.
A class-action settlement (Oliver v. BMW NA) covered the electric coolant pump on US N54, N54T and N55 cars. It gave owners pump replacement up to 7 years or 84,000 miles, plus a one-year window from May 5, 2021 regardless of age or mileage. A thermostat replaced on its own wasn't covered. That one-year window closed in May 2022, and every N54 car is now older than seven years, so assume any pump work is at the owner's cost.
Our advice: treat a high-mileage N54 on its original pump as due one.
Carbon on the intake valves
The N54 injects fuel straight into the cylinders, so no fuel washes the intake valves and carbon builds up on them over time.
BMW's SI B12 02 12 for N54 and N54T engines says misfires and drivability complaints "may be attributed to the formation of intake valve and port carbon deposits". BMW's misfire test plan can report "coking in the intake ports". The fix is to remove the intake manifold and blast the valves with crushed walnut shells (BMW specifies 20/30 SAE or 0.45–0.80 mm media), using new intake gaskets. Our direct-injection carbon buildup guide explains why it happens and how often it's worth checking.
VANOS faults and reduced power
VANOS faults on the N54 usually come from poor oil supply to the cam adjusters, not from failed VANOS units.
BMW's SI B11 02 08 (revision 9, September 2020) covers faults 2A82 and 2A87 (VANOS "stiff; jammed mechanically") and 130108 and 130308, with power reduction after the engine is fully warm. On the N54, boost faults 120408 and 3100 can appear as secondary codes. The bulletin applies to N54 cars built up to January 2010.
- First check: the oil filter cap insert. If it was left out at the last oil service, unfiltered oil can clog or damage the VANOS solenoids.
- Fix: replace both VANOS solenoids and change the oil and filter.
- Further check: look for deep grooves worn into the camshaft bearing ledge by the hook ring seals. BMW replaces only the ledge and seals, not the camshafts.
Oil leaks
Oil leaks from the valve cover gasket, the oil filter housing and the heat exchanger next to it are common on the N54. BMW also warns that many are misdiagnosed.
In SI B01 04 14, which covers the N51, N52, N54, N54T and N55, BMW says its claim data showed an above-average number of engine gasket repairs. It tells technicians to separate light "sweating" (no repair needed) from medium to large accumulation with pooling, dripping or spotting (repair needed). Use the same rule when you inspect a car.
Used N54 buying checklist
Inspect a used N54 from cold, scan it with a BMW-capable tool and check the paperwork. Those three steps catch most of the expensive problems.
- Cold start: ask the seller not to run the car before you arrive. Long cranking points to the fuel system. Rough running for the first minute points to injectors.
- Scan for stored faults: look for 2FBF, 29DC, 29F1 or 29F2 (fuel pressure), 29CC to 29D2 (misfires), 2A82 or 2A87 (VANOS) and 3100 or 120408 (boost). BMW's codes need a BMW-capable tool. Our OBD-II buying guide covers what a basic scanner can and can't show.
- Injector index: ask for invoices showing index 11 or higher injectors, or have a shop read the index with a borescope.
- Campaign history: ask a BMW dealer to run the VIN for 10E-A02 and other open campaigns. 10E-A02 was an emissions campaign, not an NHTSA safety recall, so don't expect NHTSA's safety-recall lookup to show it.
- Turbo noise: on the test drive, let the engine decelerate from around 3,500 rpm with your window down. A light rattle under acceleration is normal. Repeated clanking isn't.
- Cooling system: look for invoices for the water pump and thermostat, and watch the temperature reading after a long drive.
- Leaks: check around the oil filter housing, the valve cover and the underside of the engine. Pooling or dripping means a repair.
- Tuning evidence: look for a flash tune, aftermarket intakes, charge pipes, downpipes or boost gauges. A tuned car isn't automatically bad, but ask what was changed and who did it.
Maintenance that matters
On an N54, the best preventive maintenance is good oil, fitted correctly, plus a periodic look at the intake valves.
- Oil: an early 335i owner's manual specifies approved BMW synthetic oil in the 5W-30 or 5W-40 classes and tells owners to follow the car's computed service interval. Use an oil that carries the BMW Longlife approval listed for your car. Our BMW Longlife oil guide explains the LL-01 and LL-04 codes and the US/EU split.
- Oil filter cap insert: make sure it goes back in at every oil change. BMW links a missing insert to clogged VANOS solenoids.
- Intake valves: plan on a walnut-blast cleaning when misfires or rough running point to carbon. BMW's own procedure removes the intake manifold.
- Fuel-system repairs: fit index 11 or later injectors and the current pump part, then have the shop finish the job the way BMW's bulletins describe: injector calibration after new injectors, and clearing adaptations and reprogramming the DME after a new pump.
The N54 at high mileage
A high-mileage N54 can be a sound engine. Its reputation comes from failures of fuel, turbo and cooling parts bolted to it, and BMW has documented the fixes for most of them.
BMW's bulletins and settlements point at the fuel pump, injectors, wastegates, water pump, VANOS oil supply, gaskets and intake carbon. None of the bulletins we reviewed concerns the block, crankshaft or main bearings. That doesn't promise every engine will run forever. It means that at 100,000 or 150,000 miles, the car's records matter more than the number on the odometer.
A car with documented replacement of the HPFP, index 11 or later injectors, a recent water pump and thermostat, dry gaskets and no clanking from the turbos is a much safer buy than a lower-mileage car with no history. All the factory warranty extensions on these parts have expired, so budget for at least one major repair in your first years of ownership on any example without those receipts. If you're weighing it against the naturally aspirated alternative, read our N52 guide.
Frequently asked questions
Is the BMW N54 a reliable engine?
None of the BMW bulletins we reviewed concerns the block or forged crankshaft. The parts around them are another matter: the high-pressure fuel pump, piezo injectors, wastegates, electric water pump and VANOS solenoids all have documented failure modes. Reliability depends on whether those parts have been updated, so a well-documented N54 can be dependable and a neglected one can be costly.
Which BMW models have the N54 engine?
In the US: the 2007–2010 335i, 2008–2010 135i, 535i and X6 xDrive35i, the 2011–2013 335is, the 2009–2016 Z4 sDrive35i, the 2011–2016 Z4 sDrive35is, the 2011–2012 740i/740Li and the 2011 1 Series M Coupe. From 2011, the regular 135i, 335i, 535i and X6 xDrive35i switched to the N55.
Is N54 wastegate rattle a serious problem?
A light rattle between 2,000 and 4,000 rpm under steady acceleration is normal, according to BMW. A clank repeated up to six or seven times as revs fall from about 3,500 rpm means the wastegate isn't closing fully. That needs a DME update, new actuators or a new turbo, depending on the car.
How do I know if an N54 has the updated injectors?
Look at the injector index number. BMW's improved injector, available from January 2013, is index 11 or higher. Shops can read it in place with a borescope or mirror. Index 11 and higher can't be mixed with index 10 and lower on the same bank of three cylinders.
Is the N54 water pump still covered by BMW?
Almost certainly not. The class-action settlement covered pump replacement up to 7 years or 84,000 miles, plus a one-time window that ran from May 5, 2021 to May 4, 2022. Every N54 car is now past those limits.
Sources
- BMW of North America technical training: 2007 Engine Introduction (N54, N52KP, N51)
- BMW of North America technical training: 2007 Engine Mechanical
- BMW of North America technical training: 2007 Engine Technology
- BMW Group press (archived): The New BMW 335is Coupe and Convertible
- BMW Group press (archived): The All-New BMW 1 Series M Coupe
- BMWBlog: Premiere, the all-new BMW Z4 sDrive35is
- BMWBlog: First drive, 2011 BMW 740i
- Wikipedia: BMW N54
- NHTSA / BMW SI B12 55 06: N54 FC 29DC/29F2/2FBF and extended HPFP warranty
- NHTSA / BMW SI B13 14 10: Campaign 10E-A02, N54 injector inspection and replacement
- NHTSA / BMW SI B13 04 09: N54 cold start rough running with misfire faults
- NHTSA / BMW SI B01 02 15: N54 fuel injectors, warranty extension to 10 years/120,000 miles
- NHTSA / BMW SIB 13 06 19: N54T engine, inspect and replace injectors
- NHTSA / BMW SI B11 13 07: N54 distinct clanking noise from turbocharger area
- NHTSA / BMW SI B01 02 12: N54 wastegate emissions warranty extension to 8 years/82,000 miles
- NHTSA / BMW SI B11 07 11: Turbocharger failure, oil supply and return line blockage
- NHTSA / BMW SIB 01 13 21: Class action settlement, N54/N54T/N55 electric engine coolant pump
- NHTSA / BMW SI B12 02 12: N54 and N54T drivability complaints and intake carbon cleaning
- NHTSA / BMW SIB 11 02 08: Power reduction, VANOS faults 2A82/2A87
- NHTSA / BMW SI B01 04 14: External engine oil leaks and repairs
- BMW 335i owner's manual (ManualsOnline copy): engine oil
Keep reading
Related posts

Engine Guides
BMW N55 Engine Guide: Specs, Problems and Buying Advice
BMW N55 3.0 turbo six explained: verified specs by model, the VANOS recall, common leaks and water pump faults, N54 differences and a used-car checklist.
BMW11 min

Engine Guides
BMW S58 Engine Guide: Specs, Problems and Buying Advice
BMW S58 explained: specs and power for each M3, M4, M2 and X3 M, the bearing-shell campaigns, M Ignite, and what to check before buying a used one.
BMW12 minVideo

Engine Guides
BMW B38 Engine Guide: Specs, Problems and Buying Advice
BMW and MINI B38 1.5 three-cylinder: verified specs by model, the 2015 thrust bearing fix, leaks, recalls, oil spec and a used-car checklist.
BMW12 minVideo

Engine Guides
BMW B47 Diesel Guide: Specs, EGR Recall and Problems
BMW B47 2.0 diesel explained: verified specs by model, the EGR cooler recall and its scope, damper and DPF issues, and a used-buyer checklist.
BMW12 minVideo

Engine Guides
BMW B58 Engine Guide: Specs, Problems and Buying Advice
BMW B58 3.0 turbo six explained: specs by version (B58, TU, TU2), the Supra link, known problems backed by BMW bulletins, and used-buyer checks.
BMW14 minVideo

Engine Guides
BMW M54 Engine Guide: Specs, Problems and Buying Checks
BMW M54 2.2, 2.5 and 3.0 specs by market, where it was fitted, CCV, cold-climate and cooling problems with BMW bulletins, and a used-car checklist.
BMW10 minVideo

Lights on.
Subscribe.
Engine walkthroughs for BMW, VW, Audi and Mercedes-Benz owners, on YouTube at @HarisCars.
Subscribe on YouTube